Cabin Series: Typical Materials Package Floor System Windows 2x6 pressure treated sills Pella® ProLine® brown aluminum clad windows with low-E insulated glass (3) 2x8 girders (built up on job) Pella® full screens 2x8 floor joist @ 16" O.C. with required hangers Exterior Doors 5/8" 4x8 CDX fir plywood floor sheathing Therma-Tru® steel insulated door with insulated glass Log Walls & Gables Schlage® exterior lockset * "Cabin Grade" kiln dried eastern white pine logs Exterior Trim All necessary foam gaskets, caulking, dowels and 10" screws 1x8 or 1x10 pine fascia Window and door nailers with caulking V-match knotty pine soffit Log siding and flashing as necessary for skirting 5/4x4 pine window and door trim Ceiling/Loft System Porch System 2x8 loft joists @ 16" O.C. or 2x6 ceiling joists @ 16" O.C. (2) 2x6 pressure treated box girder 5/8" 4x8 CDX fir plywood loft floor sheathing 2x6 pressure treated nailer Loft bearing wall as required 2x6 pressure treated joists @ 16" O.C. with necessary hangers Roof System 4x6 pressure treated posts with 4x8 D4S girder 2x8 rafters @ 16" O.C. with 2x10 ridge 2x6 porch rafters @ 16" O.C. 2x6 ties as required 5/4x6 pressure treated decking 5/8" 4x8 CDX fir plywood roof sheathing 2x4 ceiling joists @ 16" O.C. with V-match knotty pine ceiling 3-tab 25-year roof shingles with felt paper and 8" galv. drip edge Hardware Grace® Vycor® ice & water shield in valley All required nails are provided with the package * Cabin Grade logs are shorter in length and have slight milling or other imperfections Note: Cabin Series kits are intended for recreational use only, and may not meet building codes Maine Pine Log Homes reserves the right to update or improve material specifications.