Award of Honor Plaque_Division 2

Hammond Lumber Mills Receive Four Awards in Safety

The Northeast Lumber Manufacturers Association (NeLMA) announced in July that it has given Hammond Lumber Company four awards for outstanding safety performance during 2019 at Hammond’s sawmill and planer mill in Belgrade. The awards are given to mills operating in the New England states, plus New York and Pennsylvania.

A Maine family-owned business founded in 1953, Hammond finished first in Division 2 for the combined operations of both mills. Divisions are determined by the number of worker-hours logged during a calendar year. A Division 1 classification represents 1 to 25,000 hours, while Division 2 represents 25,001 to 50,000 hours. The planer mill and sawmill received a fourth award for having an accident free year in combined operations.

         

The Maine family-owned business also earned first place in Division 1 for planer-mill safety, and second place in Division 2 for sawmill safety.

Conceivably best-known today as a building supplier operating 21 retail stores throughout Maine, Hammond Lumber began in 1953 as a three-man sawmill, which is still housed at its original location in Belgrade. In its 65 plus years of continuous operation, the Hammond mill has seldom had a lost-time accident and has won many safety awards.

According to safety director Bruce Pelletier, there has not been a lost-time accident in the sawmill since 2004, nor in the planer mill since 2007. “Its amazing to work with dedicated people who put such an effort in each and every day to do their job to the very best of their ability”, says Pelletier.

A safety committee established in 1985 continues to meet once a month to identify and correct potential safety hazards on the job as well as discuss ideas for keeping everyone in the company safe during their off-hours, too. The position of full-time safety director was created in 2005 and has been filled by Pelletier ever since.

There are currently 11 people working in the sawmill, and 6 in the planer mill, representing over 200 years of experience at Hammond. Craig Dawes has worked for the company for 40 years and Cliff Elliott for 35. Alan Bickford and Travis Manley have both been on the job for more than 20 years. Ron Albair 15 years, Coyt Ingraham and Chris Hinkel over 13 years, while Bruce Albair and Frank Walker have 12 years.

Those with less than 10 years are Matt Dawes, Nate Hewitt, Miranda Bickford, Coyt Ingraham Jr., Justin Hewitt, Colby Ingraham, Eric Knudsen, and Dan LaMarre.

In addition to its safety record, the Hammond sawmill has been recognized for its “whole log” approach to milling. Nothing from the log goes to waste. The bark becomes mulch, and both sawdust and shavings are used as bedding for farm animals. The ends of the boards are used for fuel to run biomass generators. The “slab wood” pieces or “edgings” from the log are fed into a chipper, and the resulting chips are used to make paper. The core log may then be used for Maine Pine Log Homes, Hammond’s line of building packages, or it may be further milled into dimensional lumber.

“It’s important to us not to waste anything,” says Donald Hammond. “There are only so many trees, so we don’t want to use more than we need to. Selective cutting is practiced on most of the lots from which the company buys logs, and many of these lots are now in their third cutting. The result is sustained yield from the same acreage.

“In fact,” says Hammond, “even though the production volume of our mill has increased quite a bit over the years, the number of acres harvested has increased very little. You could say it’s as important to us to keep our resource safe as it is to keep our people safe. We depend on both.”

Further information about Hammond Lumber Company is available toll free in Maine at 1-866-HAMMOND, or online at www.hammondlumber.com.